ifm
Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15
2012-02-29
Set-up
Set the parameters of the device
227
Analogue output
master 1
8
OK
113
ESC
Step 20:
> Indicates that the fieldbus module 15 (analogue output master 1) with
a length of 8 x 4 words is activated.
►
Press [ ] / [ ] to set the requested number of bytes.
►
Press [OK] to save the settings and scroll to the next display.
OR:
►
Use [ESC] to return to screen 87 [Fieldbus IP Address]
Analogue input
master 2
0
OK
114
ESC
Step 21:
> Indicates that the fieldbus module 16 (analogue input master 2) is not
activated.
►
Press [ ] / [ ] to set the requested number of bytes.
►
Press [OK] to save the settings and scroll to the next display.
OR:
►
Use [ESC] to return to screen 87 [Fieldbus IP Address]
Analogue output
master 2
0
OK
115
ESC
Step 22:
> Indicates that the fieldbus module 17 (analogue output master 1) is
not activated.
►
Press [ ] / [ ] to set the requested number of bytes.
►
Press [OK] to save the settings and scroll to the next display.
OR:
►
Use [ESC] to return to screen 87 [Fieldbus IP Address]
Fieldbus Data
Diagnostics
0
OK
116
ESC
Step 23:
> Indicates that the fieldbus module 18 (fieldbus data diagnosis) is not
activated.
►
Press [ ] / [ ] to set the requested number of bytes.
►
Press [OK] to save the settings and scroll to the next display.
OR:
►
Use [ESC] to return to screen 87 [Fieldbus IP Address]
Host command
channel
0
OK
117
ESC
Step 24:
> Indicates that the fieldbus module 19 (host command channel) is not
activated.
►
Press [ ] / [ ] to set the requested number of bytes.
►
Press [OK] to save the settings and scroll to the next display.
OR:
►
Use [ESC] to return to screen 87 [Fieldbus IP Address]
