ifm
Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15
2012-02-29
The host command channel
Commands in the host command channel
169
Description of the fields [Data call 1/2]
10809
Data call 1
Data call 0
Value
[hex.]
Value
[bin.]
Value
[hex.]
Value
[bin.]
Description
8 1000 0 0000
protective operation, everything ok (also non-existent, non-configured or dependent output
circuits are displayed as "ok")
9
1001
1
0001 protective operation, output circuit 1 off
A
1010
2
0010 protective operation, output circuit 2 off
B
1011
3
0011 protective operation, both output circuits off
C
1100
4
0100 configuration operation: power on
D 1101 5 0101
configuration
operation
E
1110
6
0110 reserved / not defined
F
1111
7
0111 configuration operation: fatal device error, RESET or device exchange required
-
-
> 8
1xxx no current diagnostic information available, please wait.
Description of the fields [OSSD1/2 not green]
10810
Value [hex.]
Value [bin.]
Description
0
0000
no modules, responses of the data calls in the words 6...17 are not relevant
1
0001
number of modules in the output circuit is 1
… …
…
6
0110
number of modules in the output circuit is 6
7
0111
number of modules in the output circuit is > 6
> 8
1xxx
reserved / not defined
Description of the fields [Colour in the output circuit]
10811
Module address 1...6 in output circuit 1/2: Indicates the index of the module of the configuration. The
module address which was defined in the ASIMON program is indicated.
Value [hex.]
Value [bin.]
Description
0
0000
green, permanently lit
1 0001
green,
flashing
2
0010
yellow, permanently lit
3 0011
yellow,
flashing
4
0100
red, permanently lit
5 0101
red,
flashing
6 0110
grey,
off
