ifm
Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15
2012-02-29
Getting started
Connect Allen Bradley ControlLogix controller via DeviceNet
31
> The result is displayed:
4.4.10
Step 10 – connect projection PC with the ContolLogix CPU
10534
Here, select the communication path for your application.
If the communication path has already been set:
►
Skip this step 10 and continue with
Step 11 – download of the created configuration to the ControlLogix
PLC
(
→
page
).
►
Click on the symbol [Who Active].
> The dialogue [Who Active] is displayed
(
screenshot).
►
Select the right access path.
NOTE:
Depending on type and number of
the activated communication drivers, the
dialogue [Who Active] can differ
considerably from the one shown in this
figure.
►
Adopt the setting with [Set Project
Path].
►
Close the dialogue with [Close].
