ifm
Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15
2012-02-29
Set-up
Set the parameters of the device
225
Digital inputs
Master 1 (B)
16
OK
103
ESC
Step 10:
> Indicates that the fieldbus module 5 (digital input master 1B) with a
length of 16 bytes is activated.
►
Press [ ] / [ ] to set the requested number of bytes.
►
Press [OK] to save the settings and scroll to the next display.
OR:
►
Use [ESC] to return to screen 87 [Fieldbus IP Address]
Digital outputs
Master 1 (B)
16
OK
104
ESC
Step 11:
> Indicates that the fieldbus module 6 (digital output master 1B) with a
length of 16 bytes is activated.
►
Press [ ] / [ ] to set the requested number of bytes.
►
Press [OK] to save the settings and scroll to the next display.
OR:
►
Use [ESC] to return to screen 87 [Fieldbus IP Address]
Digital inputs
Master 2 (B)
16
OK
105
ESC
Step 12:
> Indicates that the fieldbus module 7 (digital input master 2B) with a
length of 16 bytes is activated.
►
Press [ ] / [ ] to set the requested number of bytes.
►
Press [OK] to save the settings and scroll to the next display.
OR:
►
Use [ESC] to return to screen 87 [Fieldbus IP Address]
Digital outputs
Master 2 (B)
16
OK
106
ESC
Step 13:
> Indicates that the fieldbus module 8 (digital output master 2B) with a
length of 16 bytes is activated.
►
Press [ ] / [ ] to set the requested number of bytes.
►
Press [OK] to save the settings and scroll to the next display.
OR:
►
Use [ESC] to return to screen 87 [Fieldbus IP Address]
Analogue
multiplex input
1
OK
107
ESC
Step 14:
> Indicates that the fieldbus module 9 (analogue multiplex input) is
activated.
►
Press [ ] / [ ] to set the requested number of bytes.
►
Press [OK] to save the settings and scroll to the next display.
OR:
►
Use [ESC] to return to screen 87 [Fieldbus IP Address]
