ifm
Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15
2012-02-29
The host command channel
Commands in the host command channel
130
7.2.2
Error codes for host commands (summary)
10777
Here you will find general error messages.
Value [hex]
Meaning
01
no slave response OR:
master is in the offline mode when requesting the command
02
no slave with the old address found
03
slave with address 0 connected
04
slave with the new address already exists
05
error when deleting the old address
06
error when reading the IO configuration
07
error when writing the new address or extended ID code 1
08
new address could only be saved temporarily
09
extended ID code 1 could only be saved temporarily
0A
the slave is not in the LAS
0B
parameter or address invalid
14
master is in the wrong operating mode *)
17
master is not in the projection mode
7.2.3
Error codes for host commands for safety slaves
10779
Value [hex]
Meaning
00…02
general errors during command processing
0A…0C internal
protocol
error
10
sub command invalid
11
no slave with the profile S-7.F.F on the slave address
16
the monitor with the address was changed in the protocol mode
20
command could not be processed within the specified time
EE
fatal error during command execution
