Idex Hale Sam, Technical Manual

Page: 108 / 223

88
D. Perform removal portion of circuit breaker box R&R procedure.
(See Figure 59) and section 4.10.6, page 115.)
Figure 59. Circuit Breaker Box Removal
E. Perform removal portion of Autolube assembly R&R. See Figure 60 and reference
Midship Pump Technical Manual (FSG-MNL-00200).
Figure 60. Autolube And Zero Pressure Solenoid Removal
Removal
A.
Using slip joint plyers, hold nipple (Autolube side of solenoid).
B. Using adjustable wrench, remove solenoid (with water detection sensor).
C. Hold solenoid and using 9/16-in wrench, remove adapter (with water detection
sensor).
Installation
A.
Apply Loctite 580 to threads of existing adapter and nipple.
(Use sealant sparingly to prevent water in oil sensor damage.)
B. Install solenoid on adapter (with water in oil sensor).