Idex Hale Sam, Technical Manual

Page: 157 / 223

137
D. Touch SPG Enable row (see Figure 110).
Figure 110. Suction Pressure Governor Enable Row Selected
E. Touch wrench and gears button (lower right-hand corner).
F. On Suction Pressure Governor Enable Setting screen (Figure 111), touch Suction
Pressure Governor Enabled button (Figure 112).
Figure 111. SPG Enable Settings Screen
Figure 112. SPG Enable Settings Screen – Enable Button Selected
G. Touch check mark button (lower right side of left-hand half of screen). Updated
Governor Menu screen (Figure 110) is displayed.
NOTE
The New Value column must display Enabled, otherwise repeat Step E thru Step G
(above) before proceeding.
H. Touch Save button (lower right-hand corner of screen).
I. Touch Back Arrow button (lower left-hand corner of screen).