Idex Hale Sam, Technical Manual

Page: 81 / 223

61
4.4.6.1 Onboard Tank Water Or Foam Tank Level Sensor
Refer to the ITL–40 Tank Level Quick Start Guide (P/N 118252) or Class 1 Operation Manual,
Intelli-Tank Level 40 (P/N 118253) to locate the onboard tank water level pressure transducer
(see Figure 40).
Figure 40. Onboard Water Tank Level Transducer Installation
See Figure 41 for the transducers pin layout and Table 18 for the transducer to ITL–40 pin con-
nections.
Figure 41. Hale Pressure Transducer And Pin Layout
Table 18. Onboard Tank Water Level Sensor Wiring (From/To Listing)
From Pressure Transducer Pin To ITL–40 Pin
A (+ 5V Reference) 5 (+ 5V Reference) [Output]
B (Reference Return) 7 (5V Reference Return) [Output]
C (Pressure Signal) 6 (Pressure Signal) [Input]
Refer to Table 19 for a list of tools and/or consumables required for this procedure.
Table 19. ITL–40 Pressure Transducer Tools And Consumables List
Standard Tools Special Tools Consumables
PPE (Eye and Hand Protection) None Cable Ties (As Required)
1-in Wrench Loctite 580 (or Equivalent)
Wire Cutter Pressure Transducer
<See FSG-PL-01505, Sheet 1>