Idex Hale Sam, Technical Manual

Page: 212 / 223

192
•
Assign a 2 to all Hale MIVs and Akron Brass Swing-Out™ valves used as an auxiliary intake
(Pony).
•
Assign a 3 to the Tank-To-Pump valve. (Special purpose there is only one.)
•
Assign a 4 to the Tank Fill valve. (Also a special purpose valve and again there is only one.)
Table 80 lists the Hale recommended function (factory defaults) for SAM discharges.
Table 80. SAM Discharge Valve Function Defaults
Akron Brass Swing-out
Valve Size (Inches)
Default/Recommended
Function Setting
1.5 Bailed
2 Bailed
2.5 Bailed
3 Bailed *
4 Non Bailed
5 Non Bailed
6 Non Bailed
* Non Bailed for a deck gun.
6.10. How To Assign/Change A Valves MAX PSI
After selecting the desired valve, touch the MAX PSI (0 to 300) text box. (see Figure 161, except
MAX PSI (0 to 300) is highlighted). The number pad, CLEAR, and ENTER buttons appear, touch
the number(s) for the desired pressure then touch ENTER button. (Touch CLEAR button to delete
text box data.)
Table 81 lists the default maximum pressure setting for SAM discharge valves and provides rec-
ommended preset pressure assignment for water/foam and CAFS.
Table 81. SAM Discharge Valve Max PSI Defaults
Akron Brass Swing-out
Valve Size
(Inches)
MAX
PSI Setting
(Hale Default)
Foam Or Water
Preset Setting
(Hale Default)
CAFS
Preset Setting
(Hale Default)
1.5 300 150 100
2 300 125 100
2.5 275 100 100
3 250 95 95
4 200 90 95
5 185 90 95
6 175 90 95