Idex Hale Sam, Technical Manual

Page: 129 / 223

109
Figure 77. Audio Amplifier
Figure 78. Ground Loop Isolator
Connect the amplifier according to Table 61.
Table 61. Audio Amplifier Wiring (From/To Listing)
From Audio
Amplifier
To Ground
Loop Isolator
To SAM
Speakers
To Circuit
Breaker Box
Pwr Neg (Black Wire) N/C N/C Ground Stud
(Pump Body)
Pwr Pos (Red Wire)
(With 10A In-line Fuse)
N/C N/C Connector 1 Pin 3
(CB 1)
Remote On (Blue Wire) N/C N/C N/C
Aux Input Left
(RCA, White, Female)
Audio Left
(RCA, Black, Male)
N/C N/C
Aux Input Right
(RCA, Red, Female)
Audio Right
(RCA, Red, Male)
N/C N/C
Audio Out (Wire Pair -
White & White/Black)
N/C + White N/C
— White/Black
Audio Out (Wire Pair -
Gray & Gray/Black)
N/C + Gray N/C
— Gray/Black
Audio Out (Wire Pair -
Green & Green/Black)
N/C + Green N/C
— Green/Black
Audio Out (Wire Pair -
Purple & Purple/Black)
N/C + Purple N/C
— Purple/Black
NOTES Wire all speakers using the same polarity.
Aux In uses the Waterproof 3.5 mm stereo to RCA adaptor to connect to the
SAM Pump Controller RCA connectors.