ICPDAS
I-8092F Software User
Manual
195
B.12 Input Register: RR4 / RR5
RR4 and RR5 are used for displaying the input signal status. The bit is 0 if the
input is on the Low level; the bit is 1 if the input is on the Hi level.
These input signals can be used as general input signal when they are not used
as function except for nLMTP/M signal.
RR4
RR5
Bit
Name
Input
Signal
Bit
Name
Input
Signal
n-ST0 n-STOP0
n-IN0
nIN0
n-ST1 n-STOP1
n-IN1
nIN1
n-ST2 n-STOP2
n-IN2
nIN2
EMG
EMGN
n-IN3
nIN3
n-EX+ nEXPP
n-IN4
nIN4
n-EX-
nEXPM
n-IN5
nIN5
n-INP
nINPOS
n-LM+ nLMTP
n-ALM nALARM
n-LM-
nLMTM
B.13 Data-Read Register: RR6 / RR7
According to the data-read command, the data of internal registers will be set
into registers RR6 and RR7. The low word 16 bits (D15 ~ D0) is set in RR6
register, and the high word 16 bits (D31 ~ D16) is set in RR7 register for data
reading.
RR6
RR7
The data is binary formatted; 2’ s complement is for negatives.