ICPDAS
I-8092F Software User Manual
78
6.5 Other functions
6.5.1 Holding the Driving Command
void
i8092MF_DRV_HOLD(
BYTE
cardNo
,
WORD
axis
)
Description:
This command is usually used when users desire to starti multi-axis driving
simultaneously. When this command is issued, users may write other driving
commands to the control card. All the driving commands will be held after
i8092MF_DRV_HOLD() is issued, and these commands will be started once the
i8092MF_DRV_START() is issued. However, if in driving, this command will not
cause the driving to be stopped. But the next command will be held.
Parameters:
cardNo
:
Module number
axis
:
Axis or Axes (Please refer to Table 2-1 for the axis definition.)
Return:
None
Example:
Please refer to the example in section 6.5.2.
6.5.2 Release the Holding Status, and Start the Driving
void
i8092MF_DRV_START(
BYTE
cardNo
,
WORD
axis
)
