manualshive.com logo in svg

IC Realtime 1U POE NVR Series, User Manual, Page: 94 / 291

Share
Download
IC Realtime 1U POE NVR Series User Manual Download Page 94

4.3.3.3 Instant Backup

This function allows you to record and backup live footage from the NVR into a USB storage device.

The recording will start by clicking the

icon. To stop recording, click this icon again. The clip

will be automatically saved into the connected USB storage device

4.3.3.4 Manual Snapshot

This function allows you to take one to five snapshots of a live video and save them into a
USB storage device. By clicking the

icon, you can take snapshots. The snapshots are

automatically saved into the connected USB storage device. You can view the snapshots
using a PC.

To change the number of snapshots, select

Main Menu

>

Advanced Settings

>

Camera

Configuration

>

Video Stream

>

Snapshot

, in the

Manual Snapshot

list, select the desired

snapshot quantity.

4.3.3.5 Two-way Talk

This function allows you to perform the voice interaction between the NVR and the remote
device (if it has audio output with speakers).

Step 1

Click

to start the two-way talk function the icon now is shown as

.

Step 2

Click

again, to end the two-way talk.

4.3.3.6 Switch Bit Streams

This function allows you to switch the channel main stream/sub stream according to current
network bandwidth.
● M: Main stream. This is typically a high-bitrate, high-resolution stream. It occupies large

network bandwidth and is the recording stream by default.

● S: Sub stream. Its definition is low but occupies small network bandwidth. It is suitable for

general surveillance, remote connection, etc.

Click

to switch the bit stream type of the main stream and sub stream.

● M: Main stream.
● S: Sub stream. Some IP cameras support two or more sub streams (S1, S2). Refer to

"4.2.6.1 Encode" for detailed information.

4.3.3.7 Shortcut Menu

By right-clicking on the live view interface, you can quickly access the corresponding functional
interface and perform relevant operations, including entering the main menu, searching
recordings, and selecting screen split mode.
Right-click on the live interface and the shortcut menu will be displayed. Refer to Table 4-22
for detailed information.

83

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Reviews:

No comments