IC Realtime 1U POE NVR Series, User Manual, Page: 275 / 291

The Tour interface will be displayed. See Figure 4-284.
Figure 4-284
● To toggle image switching, click the left mouse button on the top right of the live view screen or press
Shift to switch between the icon (image switching is allowed) and (image switching is not
allowed).
● On the navigation bar, click the icon to enable the tour and click to disable it.
Step 2 Configure the tour setting parameters. See Table 4-92.
Table 4-92
Parameter Description
Enable Tour Enables the tour function.
Interval
Enter the amount of time that you want a channel group to display
before switching to another group. The value ranges from 5
seconds to 120 seconds, and the default value is 5 seconds.
Motion Tour, Alarm
Tour The tour will be triggered by alarm and motion events. Select the
View 1 or View 8 for
Motion Tour and Alarm Tour.
Live Layout
In the Live Layout list, select View 1 , View 4 , View 8 , or other
modes that are supported by the NVR.
Channel Group
Displays all channel groups under the current Window Split setting.
● To Add a channel group: Click Add , in the pop-up Add
Group channel, select the channels to form a group, and
then click Save .
● To Delete a channel group: Select the check box of any
channel group, and then click Delete .
● To Edit a channel group: Select the check box of any channel
group and then click Modify , or double-click on the group. The
Modify Channel Group dialog box will be displayed. You can
also regroup the channels.
● Click Move up or Move down to adjust the position of the
264