manualshive.com logo in svg

IC Realtime 1U POE NVR Series, User Manual, Page: 124 / 291

Share
Download
IC Realtime 1U POE NVR Series User Manual Download Page 124

4.6.9 Other Aux Functions

4.6.9.1 Digital Zoom

In 1-window playback mode, left click mouse to select any zone on the screen, you can zoom in
the current zone. Right click the mouse to exit.

4.6.9.2 Switch Channel

● During playback mode, select from the drop-down list to switch playback channel.
● The smart search channel does not support this function either.

4.7 AI

4.7.1 AI Search

The AI Search allows specific search results based on Intelligent Events such as IVS rules,
Face, human and vehicle recognition, and Heat Map.

Typically the AI events are camera based, meaning the IP camera must support the necessary
AI or IVS events to properly work with the NVR..

4.7.1.1 Face Detection

You can search the detected faces and play back recordings.

Step 1

Select

Main Menu

>

Playback

>

Advanced Search

>

113

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Reviews:

No comments