Step 2
Click on the directional arrows to move the PTZ to the required position.
Step 3
In the
Preset
box, enter the value to represent the required position.
Step 4
Click
Setting
to save and complete the preset settings.
4.4.3.2 Configuring Tours
Step 1
On the expanded PTZ control panel, click
.
The
PTZ
interface will be displayed.
Step 2
Click the
Tour
tab.
The
Tour
tab will be displayed. See Figure 4-97.
Figure 4-97
Step 3
In the
Tour No.
box, enter the value for the tour route.
Step 4
In the
Preset
box, enter the preset value.
Step 5
Click
Add Preset
.
A preset will be added for this tour.
● You can repeat adding more presets.
● Click
Delete Preset
to delete the preset for this tour. This operation can be
repeated to delete more presets. Some protocols do not support deleting.
4.4.3.3 Configuring Patterns
Step 1
On the expanded PTZ control panel, click
.
The
PTZ
interface will be displayed.
Step 2
Click the
Pattern
tab.
The
Pattern
interface will be displayed. See Figure 4-98.
99
Summary of Contents for 1U POE NVR Series
Page 1: ...User s Manual V4 1 1 ...
Page 106: ...Figure 4 92 Figure 4 93 Step 2 Configure parameters See Table 4 26 95 ...
Page 291: ...280 ...