IC Realtime 1U POE NVR Series, User Manual, Page: 194 / 291

◇
Define for all days of a week: Click All , all icons will change to . On the
timeline of any day, click the half-hour blocks to select the active periods, and all
the days will take the same settings.
● Define the period by editing. For the example, Sunday will be configured..
1. Click .
The Period interface will be displayed. See Figure 4-185.
Figure 4-185
2. Enter the time frame for the period, and then select the check box to enable the settings.
◇ There are six periods for you to set for each day.
◇
Under Copy to , select All to apply the settings to all the days of a week, or
select specific day(s) that you want to apply the settings to.
3. Click OK to save the settings.
Step 3 On the Motion Detection interface, click Apply to complete the settings.
4.8.5.2 Video Tampering
If a camera lens is covered, or if the video displays in a single color due to sunlight conditions,
the NVR can detect and create an event for these situations.
Step 1
Select Main Menu > Advanced Settings > Alert Center > Video Detection > Video Tampering .
The Video Tampering interface will be displayed. See Figure 4-186.
183