manualshive.com logo in svg

IC Realtime 1U POE NVR Series, User Manual, Page: 116 / 291

Share
Download
IC Realtime 1U POE NVR Series User Manual Download Page 116

8

Search

List Display

After setting desired time and selecting “Search” the
File List will display.

●

File List

: Displays the available stored events / files

in order based on time stamp.

All the operations above (such as playback speed, channel, time and progress) are
dependent on hardware of the NVR model. Some of the functions may not be present
depending on the NVR model.

4.6.2.1 Playback Control

The playback control interface is shown as below. See Figure 4-103.

Figure 4-103

Refer to the following sheet for more information. See Table 4-29.

Table 4-29

Icon

Function

,

Play/Pause

In slow play mode, click to switch between play/pause.

Stop

When playing back, click to stop the current playback process.

Backwards play

In normal play mode, left-click the button, and the file will play backward.
Click again to pause the current play.

In backward play mode, click

or

to restore normal play.

Display previous frame/next frame.

When pausing the normal playback file, click

or

to play back

frame by frame.

In frame by frame playback mode, click

or

to resume

normal playback mode.
Slow play

In playback mode, click it to realize various slow play modes such as slow
play 1, slow play 2, and etc.
Fast forward

In playback mode, click to enable various fast play modes such as fast
play 1, fast play 2 and etc.

105

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Reviews:

No comments