Parameter
Description
Name
Customize the rule name.
Duration
Set the minimum time that the object stays until the event alarm is
triggered.
Filter target
Click
to filter the target. Click and hold the blue wireframe and
drag to adjust the size of the area with the mouse.
Each rule can set 2 target filters (maximum size and minimum
size), that is, when the passing target is smaller than the minimum
target or larger than the maximum target, no alarm will be
generated. The maximum size should not be smaller than the
minimum size.
3) Draw a rule. Left-click mouse to draw a zone until you draw a rectangle. Right click
the mouse when finished.
4) Click
OK
to complete the rule setting.
Step 3
Click
, you can refer to "4.7.2.4.1 Tripwire" to set other parameters.
Step 4
Click
Apply
to complete the setup.
4.7.2.5 Video Metadata
This feature allows the detection and extraction of key features from the human body, motor
vehicle, and non-motor vehicles from the live video. These features can then be usde in
search queries.
When enabling the video Metadata Function, the NVR will set the corresponding smart plan as active.
The connected IC Realtime camera must support the video Metadata function.
Step 1
Select
Main Menu > Advanced Settings > Alert Center
>
Parameters
>
Video Metadata
.
The
Video Metadata
interface will be displayed. See Figure 4-158
Figure 4-158
Step 2
In the
Channel
list, select a channel that you want to configure video MetaData
function, and then select the Metadata type. See Table 4-45
Table 4-45
150
Summary of Contents for 1U POE NVR Series
Page 1: ...User s Manual V4 1 1 ...
Page 106: ...Figure 4 92 Figure 4 93 Step 2 Configure parameters See Table 4 26 95 ...
Page 291: ...280 ...