IC Realtime 1U POE NVR Series, User Manual, Page: 223 / 291

Step 1 Select Main Menu > Advanced Settings > NETWORK > DDNS .
The DDNS interface will be displayed. See Figure 4-226.
Figure 4-226
Step 2 Configure the settings for the DDNS parameters. See Table 4-68.
Table 4-68
Parameter Description
Enable
Enable the DDNS function.
After enabling DDNS function, third-parties may collect your
Device information.
Type Type and address of DDNS service provider.
● Type: ICDDNS; address: https://www.icddns.com/
● Type: NO-IP DDNS; address: dynupdate.no-ip.com
● Type: Dyndns DDNS; address: members.dyndns.org
Server Address
Domain Name
The domain name for registering on the website of DDNS service
provider.
User Name Enter the user name and password obtained from DDNS service
provider. you will need to register (including user name and
password) on the website of DDNS service provider.
Password
Interval The DDNS service will refresh in the specified time
Step 3 Click Apply to complete the settings.
Enter the domain name in the browser on your PC, and then press Enter .
If the web interface of the NVR will be displayed, the configuration is successful. If not,
the configuration is failed. Note: This will only work if accessing offsite or NAT loopback
is enabled on the local network of the NVR.
212