Step 2
Set
Channel
,
Type
,
Start Time
,
End time
.
Step 3
Click
Search
.
Step 4
The Heat map report will be displayed..
Click
Export
and then select saved path, click
Save
to save the heat map report to
the USB device.
4.7.1.10 iMD (Intelligent Motion Detect)
You can search and play back videos that triggered iMD events.
Step 1
Select
Main Menu > Advanced Settings > Alert Center
>
AI Search
>
iMD
.
Step 2
Select channel, type, start time and end time, and then click
Search
.
● Click
to play back the video.
● Select a video and click
Export
to export video file to a USB flash drive.
4.7.2 AI Parameters / Configuration
In the following sections we will be covering how to set up the AI settings. The AI events are
mutually exclusive meaning each individual channel can only use one of the following functions at
a time. This is due to the resources allocated to do these functions being one and the same, just
processed differently. Each channel can have a different type of event. In the case of none AI
recorders, the cameras will have to have the feature built in to support it.
Third-party cameras will not be able to take advantage of these features unless you are using one
of IC Realtime’s AI NVRs such as the NVR916NS which has a dedicated onboard AI processor.
4.7.2.1 Smart Plan
The Smart Plan is used to specify the type of advanced IVS or AI functions that will be used for
each specific channel. The selection options will vary depending on the capabilities of NVR and
IP Cameras.
Options: IVS, human face detection, human face recognition, human body detection, people
counting, and heat map.
Step 1
Select
Main Menu > Advanced Settings > Alert Center
>
Parameters
>
Smart Plan
.
The
Smart Plan
interface will be displayed. See Figure 4-132.
127
Summary of Contents for 1U POE NVR Series
Page 1: ...User s Manual V4 1 1 ...
Page 106: ...Figure 4 92 Figure 4 93 Step 2 Configure parameters See Table 4 26 95 ...
Page 291: ...280 ...