IC Realtime 1U POE NVR Series, User Manual, Page: 28 / 291

No. Name Function
10 Record
● Start or stop record manually.
● In the record interface, use the direction
buttons to select the channel that you want to
record.
● Press this button for at least 1.5 seconds, to
display the manual record interface.
11
Direction keys
Switch between current activated controls by
pressing left or right.
Aux function (such as operating the PTZ menu).
12 Enter/menu key
● Confirms an operation.
● Navigate to the OK button.
● Navigate to the menu.
13
Split view
Switch between multiple and single-split views.
14
FN ● Display the PTZ control and color setting
functions if in single-channel monitoring
mode.
● In the motion detection interface, press this
button with direction keys to finish the setup.
● In-text mode, Deletes the last character. Long
press this button for 1.5 seconds to clear.
15 Alphanumeric keys
● Input password, numbers.
● Switch channel.
● Press Shift to switch the input method.
3. Device Installation
All the installation and operations here should conform to your local electric safety rules.
3.1 Inspecting NVR box contents
After you receive the NVR in its original package, please verify whether there is any visible
damage or missing items. The protective materials used for the package of the NVR can protect
against most accidental damages during transportation. Before installation, open the included
accessories box to verify the contents included with the NVR. When finished, you can remove
the protective film off the NVR.
If your unit was purchased with a preinstalled HDD verify cables are still connected correctly.
See the HDD Installation section below for reference.
17