Step 4
Set record period. It includes edit mode and draw mode. See Figure 4-39.
If you have added a holiday schedule, you can set the recording period for the holiday.
Figure 4-37
Define the period by left-clicking and dragging the mouse over the squares or selecting the
settings (gear wheel) icon to the right of the calendar.
1. Select a corresponding date to set.
◇
Define for the whole week: Click
next to
All
, all the icons switch to
, you can define
the period for all the days simultaneously.
◇
Define for several days of a week: Click
before selecting each day, the icon will
change to
. You can define the period for the selected days simultaneously.
2. On the timeline, left click mouse and then drag to define a period.
There are six periods in one day, the Device starts recoding the selected event type in the
defined period. In Figure 4-39, the different color bars stand for different record types.
◇
Green represents the general constant recording.
◇
Yellow represents for MD (motion detection) record.
◇
Red represents alarm triggers (alarm contacts) recordings.
◇
Blue represents recoding intelligent events such as iMD or IVS.
◇
Orange represents the MD&Alarm record. This requires both event types to be
triggered to record the event. If 1 trigger but not the other the video will not be stored.
The MD record and alarm record function are both disabled if you enabled the
MD&Alarm function
◇
Select a record type and then click the
of the corresponding date to clear the
corresponding period.
54
Summary of Contents for 1U POE NVR Series
Page 1: ...User s Manual V4 1 1 ...
Page 106: ...Figure 4 92 Figure 4 93 Step 2 Configure parameters See Table 4 26 95 ...
Page 291: ...280 ...