IC Realtime 1U POE NVR Series User Manual Download Page 274

Page: 274 / 291

Step 2

Configure the settings for the display parameters.

Table 4-91

Parameter

Description

Main Screen/Sub
Screen

Configure the output port format of both screens. NVRs with only 1
HDMI and VGA will only support simultaneous output.

● When sub screen is disabled, the format of main screen

will be HDMI1/VGA simultaneous output.

● When sub screen is enabled, the format of main screen and sub

screen are non-simultaneous outputs.

◇

When output port of sub screen is set to

HDMI

, the output port

of main screen is set to

VGA

by the device.

◇

When output port of sub screen is set to

VGA

, the output port

of main screen is set to

HDMI

by the device.

Time Title/Channel
Title

Select the check box and the date and time of the system will be
displayed in the preview screen.

Transparency

Set the transparency of the local menu of the NVR device. The higher
the transparency, the more transparent the local menu.

Time Title/Channel
Title

Select the check box to display the date and time the preview
screen.

Image
Enhancement

Select the check box to optimize the edges of the preview image.

iMD Preview

Select the check box to display the iMD previews in the live view
interface.

AI Rule

Select the check box to display the AI rules in the live view interface.

Not all NVR models support this feature.

Original Ratio

Click

Setting

and select the channel to restore the corresponding

channel image to the original aspect ratio.

Live Audio

Configure audio input on live view. You can select

Audio 1

Audio 2

and

Mixing

. For example, if

Audio 1

for

channel is selected, the

sound of audio input port 1 of the camera will play. If

Mixing

selected, the sound of all audio input ports will play.

Resolution

Sets the resolution for the display. Resolution ranges vary depending
on model.

Step 3

Click

Apply

4.16.2 Tour

This section allows you to create local display tours. When a tour is enabled, the NVR local display will cycle
through different channel split view groups if the NVR is left inactive.

Step 1

Select

Main Menu

Advanced Settings

System Operation

DISPLAY

Tour Setting

Main

Screen

(click sub screen to configure tour properties for that screen).

263

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Search results

Summary of Contents for 1U POE NVR Series

Reviews:

IC Realtime 1U POE NVR Series, User Manual, Page: 274 / 291

Search results

Summary of Contents for 1U POE NVR Series

Reviews: