manualshive.com logo in svg

IC Realtime 1U POE NVR Series, User Manual, Page: 114 / 291

Share
Download
IC Realtime 1U POE NVR Series User Manual Download Page 114

Figure 4-102

Table 4-28

No.

Function

Description

1

Display Window

Displays the searched recorded video or picture.
Depending on the mode, the NVR can support playing in
single-channel, 4-channel, 9-channel, and 16-channel
simultaneously.

Digital Zoom: When playing back in a single channel
mode, hold down the left mouse button to select the
area that you want to enlarge. The area will be enlarged
after the left mouse button is released. To exit the
enlarged status, right-click on the image.

2

Playback Controls
Bar

Playback control buttons. Refer to "4.6.2.1 Playback
Control" for detailed information.

Backup (Start & Stop)

Used to specify desired time period you wish to export /
save to a USB.
Refer to "4.6.2.3 Download Video of Specified time" for
detailed information.

Save

Click “Save” to backup the specified clip. Refer to
"4.6.2.4 Video Backup" for detailed information.

103

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Reviews:

No comments