Step 3
Input remote device user name and password.
When changing IP addresses of multiple devices at the same time, make sure
the cameras' usernames and passwords are the same.
Step 4 Click OK button to save settings. After the modification, click on Device search
again, device will display the new IP address.
4.2.1.2 Auto Changing Compression to H.265
This function can automatically set the encode format as H.265 if the H.265 Auto switch
function is enabled. The resolution will not be adjusted, and the stream value will be cut in half
while keeping the same quality as H.264. H265 may not be ideal for all scenarios user
discretion is advised. This is only supported with IC Realtime cameras with H.265 encoding
available.
Click to toggle the
H.265 Auto Switch
at the bottom of the interface. See Figure 4-46.
Figure 4-46
4.2.1.3 IP Camera Export (Exporting Remote Devices)
The list of added IP devices to your NVR can be exported to your local USB device.
This feature may not be available in all NVR models.
Step 1
Select
Main Menu > Advanced Settings > Camera Configuration
>
Add/Remove Device.
Insert a USB flash drive device and then click the
Export
option
in the bottom right of the
Add/Remove Device
interface.
The
Backup Browse
interface will be displayed. See Figure 4-47.
61
Summary of Contents for 1U POE NVR Series
Page 1: ...User s Manual V4 1 1 ...
Page 106: ...Figure 4 92 Figure 4 93 Step 2 Configure parameters See Table 4 26 95 ...
Page 291: ...280 ...