manualshive.com logo in svg

IC Realtime 1U POE NVR Series, User Manual, Page: 282 / 291

Share
Download
IC Realtime 1U POE NVR Series User Manual Download Page 282

Auto Resume after Power Failure

The system can automatically backup video file and resume previous working status after
power failure.

● The interfaces in the Manual are used for introducing the operations and only for reference.

The actual interface might be different dependent on the model you purchased. If there is an
inconsistency between the Manual and the actual product, the actual product shall govern.

● The Manual is a general document for introducing the product, so there might be some

functions described for the Device in the Manual not apply to the model you purchased.

● Besides Web, you can use our Smart PSS to login the device. For detailed information,

refer to Smart PSS user’s manual.

5 Web Operation

5.1 Network Connection

● The NVR is set to DHCP by default. If not on a network with DHCP, the IP of the NVR is 192.168.1.199.
● The NVRs support different browsers such as Safari, Firefox, Google Chrome.

Step 1

Verify the NVR is physically connected to the network via network cable.

Step 2

Configure the IP address, subnet mask, and gateway for the PC and the Device as

necessary. For details about the network configuration of the Device, refer to "4.10.3 Network".
Step 3 (Optional) On your PC, open the command prompt to check the network connection of the Device by
using "ping IPAddress.” (for example, ping 192.168.1.199)
Usually the return value of TTL is 255.

5.2 Web Login

Step 1

Open a web browser, then enter the IP address of the Device (keep in mind to specify the port if the

HTTP port has been changed, IE: 192.168.1.199:81 if the HTTP port was changed to 81), and then press
Enter.

The Login in the dialog box will be displayed. See Figure 5-1.

Figure 5-1

271

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Reviews:

No comments