IC Realtime 1U POE NVR Series, User Manual, Page: 225 / 291

Table 4-69
Parameter Description
Port Mapping Enable the UPnP function.
Status
Indicates the status of UPnP function.
● Offline: Failed.
● Online: Succeeded.
LAN IP
Enter the IP address of the router on the LAN.
After mapping has succeeded, the system will obtain the IP address
automatically.
WAN IP
Enter IP address of router on the WAN.
After mapping has succeeded, the system obtains IP address
automatically
Port Mapping
List
The settings in the port mapping list correspond to the UPnP port
mapping list on the router.
● Service Name: Name of the network server.
● Protocol: Type of protocol.
● Internal Port: Internal port that is mapped on the Device.
● External Port: External port that is mapped on the router.
● To avoid port conflict, when setting the external port, try to use the
ports from 1024 through 5000 and avoid popular ports from 1
through 255 and system ports from 256 through 1023.
● When establishing a mapping configuration, ensure the mapping
ports are not occupied or limited.
● The internal and external ports of TCP and UDP must be the
same and cannot be modified.
● Click the pencil icon to modify the external port.
Step 3 Click Apply to complete the settings.
4.11.6 Email
This section allows the NVR (Sender) to send emails to a set of defined receivers. This must be
set up correctly in order to use “Send Email” functions on events such as iMD, Motion Detection
or any other event.
Step 1 Select Main Menu > Advanced Settings > NETWORK > Email/ SMTP .
The Email interface will be displayed. See Figure 4-229.
214