manualshive.com logo in svg

IC Realtime 1U POE NVR Series, User Manual, Page: 184 / 291

Share
Download
IC Realtime 1U POE NVR Series User Manual Download Page 184

Figure 4-177

4.7.3.3.3 Import/Export Black/whitelist

The NVR supports the exporting black/whitelist to the USB device, or importing black/whitelist
from a USB device. The NVR supports .csv or .xlsx file. The export file format is .csv.
● To import black/whitelist: Click

Import

and then select the corresponding file, click

Browse

to

select and import the file.

● To export black/whitelist: Click

Export

and then select the file storage path and then click

Save

.

4.8 Event Manager

4.8.1 Alarm Info

You can search, view and back up the alarm information.

Step 1 Select

Main Menu > Advanced Settings > Alert Center > Alarm Info

.

The

Alarm Info

interface will be displayed. See Figure 4-178.

173

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Reviews:

No comments