IC Realtime 1U POE NVR Series, User Manual, Page: 62 / 291

Step 1 The Rec interface will be displayed. See Figure 4-33.
Figure 4-33
Step 2 Select a channel from the drop-down list, configure different record plans for
different channels as necessary. Select All if you want to set for all channels. See
Table 4-9 for parameters.
Table 4-9
Parameter Description
Channel
In the drop-down Channel list, select a channel to configure.
Pre-record
Enter the amount of time that you want to start the recording in
advance. For example, if you set it to 4 seconds the system will
record 4 seconds before the motion event was triggered.
51