Parameter
Description
Encryption Type
In the
Encryption Type
list, select an encryption type. The default
setting is CBC-DES.
Step 3
Compile the two MIB files by MIB Builder.
Step 4
Run MG-SOFT MIB Browser to load in the module from the compilation.
Step 5
On the MG-SOFT MIB Browser, enter the Device IP that you want to manage, then
select the version number to query.
Step 6
On the MG-SOFT MIB Browser, unfold the tree-structured directory to obtain the
configurations of the Device, such as the channels quantity and software version.
4.11.8 Multicast
This allows you to view the NVR if the connected users have exceeded the limit. Multicast
enables information (in this case, video streams and such) to be sent to multiple receivers at
the same time.
Step 1
Select
Main Menu
>
Advanced Settings
>
NETWORK
>
Multicast
.
The
MULTICAST
interface will be displayed. See Figure 4-231.
Figure 4-231
Step 2
Configure the settings for the multicast parameters. See Table 4-72.
218
Summary of Contents for 1U POE NVR Series
Page 1: ...User s Manual V4 1 1 ...
Page 106: ...Figure 4 92 Figure 4 93 Step 2 Configure parameters See Table 4 26 95 ...
Page 291: ...280 ...