IC Realtime 1U POE NVR Series User Manual Download Page 89

Page: 89 / 291

Figure 4-62

Step 2

Update the firmware of the connected remote device.

● File upgrade

1. Select a channel and then click

File Update / Local Upgrade

2. Navigate your USB Flashdrive and Select the update file.
3. Once selected, click

4.2.10 Remote Device Info

This function allows you to view the connection and alarm status of the corresponding channel.
Select

Main Menu

Advanced

Camera Configuration

Add/ Remove Device> Linked

Device Info

, the

Linked Device Info

interface will be displayed. See Figure 4-63.

Refer to Table 4-19 for detailed information.

Figure 4-63

Table 4-19

Icon

Description

Icon

Description

IPC works properly.

IPC is not supported.

Alarm Event.

Video loss event.

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Search results

Summary of Contents for 1U POE NVR Series

Reviews:

IC Realtime 1U POE NVR Series, User Manual, Page: 89 / 291

Search results

Summary of Contents for 1U POE NVR Series

Reviews: