IC Realtime 1U POE NVR Series User Manual Download Page 207

Page: 207 / 291

4.9 Operation and Maintenance

4.9.1 Log

You can view and search the log information, or backup log to the USB device.
Step 1

Select

Main Menu

Info

Log

The

Log

interface will be displayed. See Figure 4-199.

Figure 4-199

Step 2

In the

Type

list, select the log type that you want to view (

System

Config

Storage

Record

Account

Clear Log

Playback

, and

Connection

) or select

All

to view all

logs.

Step 3

In the

Start Time

box and

End Time

box, enter the time period to search, and then

click

Search

The search results will be displayed.

● Click

Details

or double-click the log that you want to view, the

Detailed

Information

interface will be displayed. Click

Next

Previous

to view more

log information.

196

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Search results

Summary of Contents for 1U POE NVR Series

Reviews:

IC Realtime 1U POE NVR Series, User Manual, Page: 207 / 291

Search results

Summary of Contents for 1U POE NVR Series

Reviews: