Figure 4-145
2) Configure the parameters. See Table 4-36.
Table 4-38
Parameter
Description
Name
Customizes the rule name.
Action
Sets the intrusion action trigger for the target object, such as
appearing and crossing.
Direction
Set the direction to cross the area, including enter, exit and both.
Filter target
Click
to set the target filter. Click and hold the blue wireframe and
drag to adjust the size of the area with the mouse.
Each rule can set 2 target filters (maximum size and minimum size).
Targets smaller than the minimum target or larger than the maximum
target will be ignored. The maximum size should not be smaller than
the minimum size.
AI recognition
On available models with Perimeter Protection support, this allows the
NVR AI to filter only the object types selected (Human and/ or Vehicle).
3) Click and hold down the left button on the monitoring screen to draw the
monitoring area. This will be the area in which the IVS rule is active.
4) Click
OK
to complete the rule setting.
Step 3
Click
, you can refer to "4.7.2.4.1 Tripwire" to set other parameters.
Step 4
Select
Enable
check box and click
Apply
to complete the intrusion
140
Summary of Contents for 1U POE NVR Series
Page 1: ...User s Manual V4 1 1 ...
Page 106: ...Figure 4 92 Figure 4 93 Step 2 Configure parameters See Table 4 26 95 ...
Page 291: ...280 ...