IC Realtime 1U POE NVR Series, User Manual, Page: 58 / 291

Table 4-8
Parameter Description
Channel
In the Channel section, select the channel that you want to
remote device to occupy on the NVR. It will register the
device to the next available channel.
Manufacturer
In the Manufacturer list, select the manufacturer of the
remote device.
Select "
Private " for IC Realtime devices.
Select Onvif for 3rd party cameras.
Select Custom or General to add device via RTSP stream.
RTSP URLs will differ between manufacturers. Consult 3rd
party manufacturers for proper RTSP strings.
IP Address
In the IP Address box, enter the IP address of the remote
device.
The default is 192.168.0.0 which the system cannot
connect to as it is not a valid address.
TCP Port
The default value is 37777 (TCP port for private
protocol). You can enter the value depending on the
IPC manufacturer.
User Name Enter the user name of the remote device.
Password Enter the password of the user for the remote device.
Remote CH No.
Enter the remote channel number of the remote device that you
want to add (extra channels on camera or recorder)
Decoder Strategy
In the Decoder Strategy list, select Default , Realtime , or
Fluent .
Protocol Type
● If the remote device is added through the private
protocol, the default type is TCP .
● If the remote device is added through ONVIF protocol,
the system supports Auto , TCP , UDP , or MULTICAST .
● If the remote device is added through other
manufacturers, the system supports TCP and UDP .
Encrypt
If the remote device is added through Onvif protocol, selecting
the
Encrypt check box will provide encryption protection to
the data being transmitted.
To use this function, the HTTPS function should be enabled for
the IP camera.
47