IC Realtime 1U POE NVR Series User Manual Download Page 81

Page: 81 / 291

4.2.5 Video Overlay

Configures the values for overlay such as camera name (channel title) and privacy masking.

4.2.5.1 Overlay

You can add the time and channel information in the live view interface.

Step 1 Select

Main Menu

Advanced> Camera Configuration

Video

Stream> Overlay

Step 2

Configure parameters.

Table 4-14

Parameter

Description

Channel

Select a channel.

Time Title

Select

Time Title

and the time will be displayed in the live

view and playback.

Drag the time title to the desired area and click

Apply

Channel Title

Select

Channel Title

and the channel name will be displayed

in the live view and playback.

Drag channel title to the desired area and click

Apply

Custom Title

You can custom title to be overlaid on the screen. Click

Setting

to set the information such as font size, title content

and text alignment, and then click

Default

Set the device default configuration.

Copy to

Click

Copy to

to copy the settings to other channels.

Step 3

Click

Apply

4.2.5.2 Privacy Masking

Configures the privacy masking area on the screen for the privacy of the area.

Step 1 Select

Main Menu > Advanced Settings > Camera Configuration

Configuration

Video Stream> Overlay

Privacy Masking

Summary of Contents for 1U POE NVR Series




































































































































































































































































































Search results

Summary of Contents for 1U POE NVR Series

Reviews:

IC Realtime 1U POE NVR Series, User Manual, Page: 81 / 291

Search results

Summary of Contents for 1U POE NVR Series

Reviews: