IBM 867413x - Eserver xSeries 330 8674, Hardware Maintenance Manual

Page: 133 / 192

Error Code/Symptom FRU/Action
206-XXX-000 (Failed Diskette Drive test)
1. Try test with another diskette
2. Cable
3.
Diskette Drive
4.
System Board
215-XXX-000 (Failed IDE CD-ROM test)
1. CD-ROM Drive Cables
2. CD-ROM Drive
3. System Board
217-198-XXX (Could not establish drive
parameters)
1. Check cable and termination
2. SCSI backplane
3. Fixed disk
217-XXX-000 (Failed Fixed Disk test)
Note: If RAID is configured, the fixed disk
number refers to the RAID logical array
1. Fixed Disk 1
2. System Board
217-XXX-001 (Failed BIOS Fixed Disk test)
Note: If RAID is configured, the fixed disk
number refers to the RAID logical array
1. Fixed Disk 2
2.
System Board
264-XXX-0NN (Failed Tape Drive test)
1. Tape Cartridge, if user executed the Read/Write Tape Drive test
(failure code of XXX = 256)
2. SCSI or Power Cable connected to tape drive with SCSI ID NN.
3. Tape Drive with SCSI ID NN. (Refer to the Help and Service
Information appendix of the tape drive’s User Guide.)
4. System Board or SCSI Controller. (Run SCSI Controller Diagnostic
to determine if the SCSI bus is functioning properly.)
264-XXX-999
(Errors on multiple tape
drives, see error text for more info)
1. See error messages/text in the PC Doctor error log for detailed
information on each individual tape drive error.
301-XXX-000 (Failed Keyboard test)
1. Keyboard
2. System Board
405-XXX-000 (Failed Ethernet test on
controller on the System Board)
1. Verify that Ethernet is not disabled in BIOS.
2. System Board
405-XXX-A0N (Failed Ethernet test on
adapter in slot A)
1. For A=0, system board
2. For A >0, adapter in PCI slot A
415-XXX-000 (Failed Modem test)
1. Cable
Note:
Ensure modem is present and attached to
server/workstation.
2. Modem
3. System Board
Error symptoms
Error Symptom FRU/Action
CD is not working properly.
1. Clean the CD.
2. Run CD-ROM diagnostics
3. CD-ROM Drive
Symptom-to-FRU index
125