IBM 867413x - Eserver xSeries 330 8674, Hardware Maintenance Manual

Page: 25 / 192

Note: If you already are running the diagnostic programs, begin with step 3.
To view the test log:
1.
Turn on the server/workstation and watch the screen.
If the server/workstation is on, shut down your operating system and restart
the server/workstation:
2. When the message
F2 for Diagnostics
appears, press F2.
If a power-on password is set, the server/workstation prompts you for it. Type
in the appropriate password; then, press Enter.
3. When the Diagnostic Programs screen appears, select Utility from the top of
the screen.
4.
Select
View Test Log
from the list that appears; then, follow the instructions on
the screen.
The system maintains the test-log data while the server/workstation is
powered on. When you turn off the power to the server/workstation, the test
log is cleared.
Diagnostics
17