IBM 867413x - Eserver xSeries 330 8674, Hardware Maintenance Manual

Page: 10 / 192

001
IS THE SYSTEM PART OF A CLUSTER?
YES. Schedule maintenance with the customer. Shut down all
systems related to the cluster. Run storage test.
NO. Go to step
002
.
002
IF THE SYSTEM IS NOT PART OF A CLUSTER:
v
Power-off the computer and all external devices.
v
Check all cables and power cords.
v
Set all display controls to the middle position.
v
Power-on all external devices.
v
Power-on the computer.
v
If the computer hangs and no error is displayed, go to
“Undetermined problems” on page 134.
v
Record any POST error messages displayed on the screen. If an
error is displayed, look up the first error in the “POST error
codes” on page 127.
v
Check the information LED panel System Error LED; if on, see
“Information panel system error LED” on page 121.
v
Check the System Error Log. If an error was recorded by the
system, see “Symptom-to-FRU index” on page 119.
v
Start the Diagnostic Programs. See “Diagnostic programs and
error messages” on page 15.
v
Check for the following responses:
1. One beep.
2. Readable instructions or the Main Menu.
003
DID YOU RECEIVE BOTH OF THE CORRECT RESPONSES?
NO. Find the failure symptom in“Symptom-to-FRU index” on
page 119.
YES. Run the Diagnostic Programs. If necessary, refer to “Starting
the diagnostic programs” on page 16.
If you receive an error, go to “Symptom-to-FRU index” on
page 119.
If the diagnostics completed successfully and you still suspect a
problem, see “Undetermined problems” on page 134.
2
Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building
System Type 8674