IBM 867413x - Eserver xSeries 330 8674, Hardware Maintenance Manual

Page: 84 / 192

Authentication Protocol
The default is CHAP then PAP. Make sure that the value in this field
matches your client settings.
For detailed information about the PPP settings, see the IBM Remote Supervisor
Adapter User’s Guide for the xSeries 330 .
8. Press F6 to apply.
9. Press Esc to return to the Configuration Settings window.
10. Press Esc to return to the Utility program main window.
11. Use the arrow keys to select Exit Utility from the menu or press Esc to close
the Utility program.
12. Remove the CD from the CD-ROM drive. The Remote Supervisor Adapter
restarts automatically.
Continue with “Completing the installation” on page 76.
Completing the installation
To complete the installation of the Remote Supervisor Adapter, do the following:
1. If you did not restart the server after installing the Advanced System
Management device drivers, restart the server now.
Note:
You do not need to restart the server if you are running the Windows
NT operating system.
2. See the IBM Remote Supervisor Adapter User’s Guide for the xSeries 330 for
detailed instructions about completing the configuration of the Remote
Supervisor Adapter features. These features include the following:
v
Defining the login IDs and passwords
v
Selecting the events that will receive alert notification
v
Monitoring remote server status using the ASM Web interface or a text-based
user interface
If you want to set up an ASM interconnect network, continue to “Planning and
cabling your interconnect network” on page 77.
Your ASM interconnect network can include as many as 12 individual ASM
connections in a single bus. These connections can include Remote Supervisor
Adapters, ASM processors, and ASM PCI Adapters. After your clients and servers
are connected, they use the ASM interconnect network to share ASM resources,
information, and alerts between multiple servers, without having to add additional
communications hardware or network interface adapters.
An ASM interconnect network is established to provide two levels of functionality.
First, the ASM interconnect network enables you to use information managed by
Remote Supervisor Adapters, ASM processors, and ASM PCI Adapters, to
configure settings and to control the servers where other Remote Supervisor
Adapters, ASM processors, and ASM PCI Adapters on your network reside.
Secondly, the ASM interconnect network enables other interconnect network
devices to use the resources (Ethernet or modem) of other Remote Supervisor
Adapters, ASM processors, and ASM PCI Adapters in the ASM interconnect
network for sending alerts. This functionality is used when Remote Supervisor
Adapters, ASM processors, or ASM PCI Adapters cannot send an alert and must
forward the information to another Remote Supervisor Adapter, ASM processor, or
ASM PCI Adapter to send the alert.
76
Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building
System Type 8674