![background image](http://html1.mh-extra.com/html/ibm/867413x-eserver-xseries-330-8674/867413x-eserver-xseries-330-8674_hardware-maintenance-manual_4071152124.webp)
6.
Slide the power supply away from the side of the chassis and lift up to remove.
PCI riser card
To remove the PCI riser card:
Note:
Read“Safety information” on page 147 and “Before you begin” on page 45.
1.
Power off the server/workstation.
2.
Remove the cover. See “Removing the cover” on page 48.
3.
Remove any adapters and put them in a safe place.
4.
Disconnect cables.
5.
Gently lift up on the card to disconnect it from the system board port.
System board
To remove the system board:
Note:
Read“Safety information” on page 147 and “Before you begin” on page 45.
1.
Power off the server/workstation.
2.
Remove the cover. See “Removing the cover” on page 48.
3.
Disconnect all cables from the system board.
4.
Remove the adapter retaining latch (see “Removing a microprocessor” on
page 90).
5.
Remove the microprocessors. See “Removing a microprocessor” on page 90.
6.
Remove the memory modules. See “
Installing memory modules
” on page 85.
7.
Remove screws from the system board.
8.
Remove the four screws from the rear of the server/workstation.
9.
Pull up on the system board to remove from the chassis.
116
Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building
System Type 8674
Summary of Contents for 867413x - Eserver xSeries 330 8674
