IBM 867413x - Eserver xSeries 330 8674, Hardware Maintenance Manual

Page: 94 / 192

Attention: When you handle electrostatic discharge-sensitive devices (ESD), take
precautions to avoid damage from static electricity. For details on handling these
devices, refer to “Handling electrostatic discharge-sensitive devices” on page 150.
1.
Review the information in “Before you begin” on page 45 and the
documentation that comes with your option.
2. Turn off the server/workstation and peripheral devices and disconnect the
power cord and all external cables; then, remove the cover (see “Removing the
cover” on page 48 for details).
3. If necessary, remove the PCI card in slot 2 for easier access to the DIMM
connectors.
4.
Touch the static-protective package containing the DIMM to any unpainted
metal surface on the server/workstation. Then, remove the DIMM from the
package.
Attention: To avoid breaking the retaining clips or damaging the DIMM
connectors, handle the clips gently.
5. Install the DIMM in the connector.
Attention: To prevent damage to the DIMM connectors do not force the
memory module into the connector.
a. Turn the DIMM so that the index slots align correctly with the connector.
Note: The DIMM has two index slots, one in the center and the other on
the left half of the DIMMS connector edge.
b.
Insert the DIMM into the connector by pressing on both corners of the
DIMM at the same time. Be sure to press straight into the connector.
Connector 1
Connector 2
Connector 3
Connector 4
c. When installing a memory module be sure that no gap exists between the
DIMM and the retaining clips. If a gap does exist between the memory
module and the retaining clips: open the retaining clips, remove the DIMM;
then, reinsert the DIMM properly.
Note: It is a good idea to install or remove any other options at this time.
6.
Turn on the server/workstation.
Attention: When you restart the server/workstation, the system displays a
message indicating that the memory configuration has changed.
v
If you installed additional memory, start the Configuration/Setup Utility
86
Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building
System Type 8674