IBM 867413x - Eserver xSeries 330 8674, Hardware Maintenance Manual

Page: 44 / 192

v
Legacy OS wake up support
Select this choice to enable or disable a non-Windows operating system to use
the adapter remote wake up capability.
– Disabled (default)
– Enabled
Notes:
1. Use the default setting for Advanced Configuration and Power Interface
(ACPI) aware operating systems, such as Windows 2000 and Windows NT.
2. If your server is running a non-ACPI operating system, you must set this
selection to enable the server to use the Wake-on-LAN support.
3.
When using a non-ACPI operating system, do not send a wake-up packet to
the server while it is turned on.
Advanced System Management
To update the Advanced System Management (ASM) firmware or configure the
ASM processor, you must download the image of the xSeries 330/IntelliStation R
Pro Advanced System Management Firmware Update Utility program from the
IBM Support page at http://www.ibm.com/pc/support on the World Wide Web.
Use the xSeries 330/IntelliStation R Pro Advanced System Management Firmware
Update Utility program to create an
xSeries 330/IntelliStation R Pro Advanced System
Management Firmware Update Utility diskette. Use the xSeries 330/IntelliStation R Pro
Advanced System Management Firmware Update Utility diskette to update the ASM
firmware or configure ASM processor settings. With the configuration utility, you
can:
v
Configure Alert Setting to enable or disable alert functions.
v
Configure Dial In/Out settings.
v
Configure General Settings , including the Name and Number that identify this
ASM hardware, the date and time reported by the ASM hardware, assorted
time-out values, and schedule a time for the system to be powered up.
v
Configure Modem Settings .
The xSeries 330/IntelliStation R Pro Advanced System Management Firmware Update
Utility diskette updates the ASM software only. It does not affect any device
drivers.
Updating the ASM firmware
To update the ASM firmware using the xSeries 330/IntelliStation R Pro Advanced
System Management Firmware Update Utility diskette, perform the following steps:
1. Turn off the server.
2. Insert the diskette in the diskette drive.
3. Restart the server to startup from the diskette drive. If the system does not
startup from the diskette drive, use the Configuration/Setup Utility program to
configure the diskette drive as a startup device. See “Using the
Configuration/Setup Utility program” on page 27.
4.
From the main menu, select
Update System Management Firmware
and press
Enter.
5. Follow the on-screen instructions to complete the update.
If there is an error in loading the ASM software, try installing the software again.
36
Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building
System Type 8674