IBM 867413x - Eserver xSeries 330 8674, Hardware Maintenance Manual

Page: 30 / 192

Table 6. NDIS (Windows NT or Windows 2000) driver teaming messages for the Ethernet controller (continued)
Event ID Type Description
04 Error Explanation: Unable to bind to physical adapter. Action: Reconfigure the
adapter team by double-clicking the PROSet icon in the control panel.
05 Error Explanation: Unable to initialize an adapter team. Action: Reconfigure
the adapter team by double-clicking the PROSet icon in the control panel.
06 Informational Explanation: Team nn . Primary adapter is initialized. Action: None.
07 Informational Explanation: Team nn . Secondary adapter is initialized. Action: None.
08 Informational Explanation: Team nn . Virtual adapter or Team is initialized. Action:
None.
09 Informational Explanation: Team nn . Primary adapter is switching over. Action: None.
10 Warning Explanation: Team nn . Adapter link down. Action: Make sure the
adapter is functioning properly.
11 Informational Explanation: Team nn . Secondary adapter took over. Action: None.
12 Warning Explanation: Team nn . Secondary adapter is deactivated from the Team.
Action: Make sure the secondary adapter is functioning properly and
that the adapter cable is securely connected to the LAN.
13 Informational Explanation: Team nn . Secondary adapter has rejoined the Team. Action:
None.
14 Informational Explanation: Team nn . Secondary adapter link is up. Action: None.
15 Error Explanation: Team nn . The last adapter has lost its link. Network
connection has been lost. Action: Shut down the server/workstation and
replace the adapters; then, restart the server/workstation to reestablish
the connection.
16 Informational Explanation: Team nn . An adapter has re-established the link. Network
connection has been restored. Action: None.
17 Informational Explanation: Team nn . Preferred primary adapter has been detected.
Action: None.
18 Informational Explanation: Team nn . Preferred secondary adapter has been detected.
Action: None.
19 Informational
Explanation:
Team nn . Preferred primary adapter took over.
Action:
None.
20 Informational Explanation: Team nn . Preferred secondary adapter took over. Action:
None.
21 Warning Explanation: Team nn . Primary adapter does not sense any Probes.
Possible reason: partitioned Team. Action: Make sure the cables of the
adapter team are connected to the same LAN segment. Reconfigure the
team if necessary.
Power checkout
Power problems can be difficult to troubleshoot. For instance, a short circuit can
exist anywhere on any of the power distribution busses. Usually a short circuit will
cause the power subsystem to shut down because of an overcurrent condition.
A general procedure for troubleshooting power problems is as follows:
1. Power off the system and disconnect the AC cord(s). Disconnect all external
cables and remove server/workstation from the rack.
22
Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building
System Type 8674