IBM 867413x - Eserver xSeries 330 8674, Hardware Maintenance Manual

Page: 135 / 192

POST error codes
In the following error codes, X can be any number or letter.
Error Code/Symptom FRU/Action
062
(Three consecutive boot failures using
the default configuration.)
1. Run Configuration/Setup
2. Battery
3. System Board
4. Processor
101, 102 (System and processor error)
1. System Board
106 (System and processor error)
1. System Board
111 (Channel check error)
1. Failing adapter
2. Memory DIMM
3. System Board
114 (Adapter read-only memory error)
1. Failing Adapter
2.
Run Diagnostics
129 (Internal cache error)
1. Processor
2. Optional Processor (if installed)
3. System Board.
151 (Real time clock error)
1. Run Diagnostics
2. Battery
3. System Board
161 (Real time clock battery error)
1. Run Configuration/Setup
2.
Battery
3.
System Board
162 (Device Configuration Error)
Note: Be sure to load the default settings
and any additional desired settings; then,
save the configuration.
1. Run Configuration/Setup
2. Battery
3. Failing Device
4. System Board
163 (Real-Time Clock error)
1. Run Configuration/Setup
2. Battery
3. System Board
164 (Memory configuration changed, see
″
Memory settings
″
on page 30.)
1. Run Configuration/Setup
2.
DIMM
3.
System Board.
165 (Service Processor failure)
1. System Board .
175 (Hardware error)
1.
System Board
176 (Computer cover or cable cover was
removed without a key being used)
1. Run Configuration/Setup
2. System Board
177, 178 (Security hardware error)
1. Run Configuration/Setup
2. System Board
184 (Power-on password corrupted)
1. Run Configuration/Setup
2.
System Board
Symptom-to-FRU index
127