IBM 866251Y - Netfinity 5500 M20, Hardware Maintenance Manual, Page: 285 / 386

Shuttle removal
Note
Read “Safety information” on page 340.
To remove the shuttle, do the following:
1. If you have not already done so, turn off the server
and peripheral devices and disconnect all external
cables and power cords (see “Preparing to install
options” on page 246).
2. Remove the top cover (see “Top cover removal” on
page 284).
3. Remove processor support tray (see “Processor
support tray removal” on page 259).
4. Disconnect all cables attached to the front of the
shuttle.
5. Remove the shuttle.
a. Loosen the screws
.1/
on the back of the
shuttle; then, slide the shuttle to the rear of the
system.
Netfinity 5500 M20 - Type 8662
277