IBM 866251Y - Netfinity 5500 M20, Hardware Maintenance Manual, Page: 159 / 386

Installing the files after installing UnixWare:
Use
the following instructions to install the ServeRAID files after
you install UnixWare, or use these instructions to update a
previously installed ServeRAID file with a newer version.
You can use the UnixWare Pkgadd or the UnixWare
SCOAdmin utility program to install the files.
Installing an HBA diskette file using Pkgadd
1. Use the ServerGuide Diskette Factory to create an
IBM ServeRAID Device Drivers for SCO Operating
Systems Diskette.
2. Insert the IBM ServeRAID Device Drivers for SCO
Operating Systems Diskette into the diskette drive.
3. Type:
pkgadd –d/ dev/dsk/fðt
4. Press Enter
5. When the message
Insert diskette into Floppy
Drive 1
appears, press Enter.
6. When the message
Installation of IBM ServeRAID
SCSI IHV HBA (ips) was successful
appears, type:
q
7. Press Enter; then after the device driver installs,
restart the system.
Installing an HBA diskette file using SCOAdmin
1. Use the ServerGuide Diskette Factory to create an
IBM ServeRAID Device Drivers for SCO Operating
Systems Diskette.
2. Insert the IBM ServeRAID Device Drivers for SCO
Operating Systems Diskette into the diskette drive.
3. Start the SCOAdmin utility program.
4. Select Software_Management.
5. Select Application Installer.
6. Select Disk_A from the Install From tab.
7. Select the Update View button.
8. When the icon labeled ips appears in the window,
select Install.
9. After the device driver installs, restart the system.
Starting the ServeRAID
background-server components
To start the background-server components:
Ÿ
If you are using OS/2 or Windows, select the
IPSRAID ADMIN-MONITOR icon on the desktop.
Ÿ
If you are using OpenServer or UnixWare:
1. Make sure you are logged on as
root
.
a. If you are not, type:
su
b. When prompted, enter the
root
password.
2. Start the background-server component
(daemon) running in the background. To do this,
type:
Netfinity 5500 M20 - Type 8662
151