IBM 866251Y - Netfinity 5500 M20, Hardware Maintenance Manual

Page: 127 / 386

State The current state (see “Physical drive
state descriptions” on page 83 and
“Logical drive state descriptions” on
page 82 more information).
Soft Event The number of soft events reported
from the device event log.
Hard Event The number of hard events reported
from the device event log.
Misc Event The number of miscellaneous events
reported from the device event log.
Parity Event The number of parity events reported
from the device event log.
PFA Event Yes - device indicates predictive
failure analysis event.
No - device does not indicate
predictive failure analysis error.
ServeRAID IPSSEND program (starting)
You can run the IPSSEND program from the operating
system command line.
To start the IPSSEND program:
Ÿ
If you are using OS/2 or Windows NT:
1. Type:
c:
\ipsadm\ipssend
2. Press Enter.
Note
The c represents the drive where OS/2 or
Windows NT is installed.
Ÿ
If you are using NetWare:
1. From the console, type:
load ipssend
2. Press Enter.
Ÿ
If you are using DOS:
1. Insert the bootable IPSSEND diskette that you
created into diskette drive A; then, type:
a:\ipssend
2. Press Enter.
Ÿ
If you are using OpenServer or UnixWare:
1. Type:
/usr/bin/ipssend
2. Press Enter.
ServeRAID IPSSEND program (using)
When you run the IPSSEND program with no
command-line parameters, a list of available functions and
their specific parameters appears. All functions require a
minimum set of parameters to run the command. If you
run the IPSSEND program with a specific function but
Netfinity 5500 M20 - Type 8662
119