IBM 866251Y - Netfinity 5500 M20, Hardware Maintenance Manual, Page: 141 / 386

Windows 95 client. Then, attach the Windows NT or
Windows 95 client to the same network as the OpenServer
or UnixWare system that contains the ServeRAID adapter
or controller. You must perform all administration functions
from the remote WIN32-Based client.
Installing the ServeRAID WIN32-based
program
This section provides instructions for installing the
ServeRAID WIN32-Based program.
Before you begin the installation.
Ÿ
Be sure that the ServeRAID adapter or controller is
physically installed, properly cabled, and configured.
Ÿ
Be sure that the network operating system is installed
and functional.
Ÿ
If the network operating system is Windows NT, you
can use the ServeRAID WIN32-Based program
remotely in the client/server mode or locally in
stand-alone mode.
Ÿ
The ServeRAID adapters and controllers do not
support Windows 95. However, you can run the
WIN32-Based program remotely on a Windows 95
client attached to a remote server running the OS/2,
NetWare, Windows NT, UnixWare, or OpenServer
operating system. Use the instructions in this section
to install the WIN32-Based program on the Windows
95 client.
Ÿ
If the network operating system is OS/2, NetWare,
OpenServer, or UnixWare, you must run the
ServeRAID WIN32-Based program remotely, in the
client/server mode.
Other requirements for this environment include:
– A Windows NT or Windows 95 client running the
IBM ServeRAID WIN32-Based program
Use the instructions in this section to install the
WIN32-Based program.
– A network adapter with proper cabling for access
to the remote systems
– The TCP/IP networking protocol installed on both
the local and remote systems
– The ServeRAID device driver and
background-server component installed on the
remote system
Refer to “Installing ServeRAID device drivers” on
page 134 for more information.
If you are using Windows NT, use the installation
instructions and ServerGuide CDs provided with the server
to install the Administration and Monitoring program. If you
want to install the program on a remote Windows 95 client,
use the ServerGuide Diskette Factory to create an
IBM
ServeRAID Administration and Monitoring Diskette; then,
Netfinity 5500 M20 - Type 8662
133