IBM 866251Y - Netfinity 5500 M20, Hardware Maintenance Manual, Page: 215 / 386

Information LED panel cover removal
Note
Read “Safety information” on page 340.
To remove the information LED panel cover, do the
following:
1. Remove the door (see “Server door and trim bezels
removal” on page 276).
2. Remove the right side panel (see “Side cover(s)
removal” on page 278).
3. Remove the information LED panel cover.
a. Place your fingers inside the right side of the
cover, near the latch tab
.1/
.
b. Move the end of the cover away from the right
side of server until the latch tab
.1/
on the cover
is released from the slot on the side of the
server.
c. Gently lift up on the cover and pivot the right
side of the cover away from the front of the
server.
d. Gently move the cover to the left to release the
left latch tab
.2/
and remove the cover from the
server.
Netfinity 5500 M20 - Type 8662
207